For SaleProjectsGalleryPerformance Parts
 
Shop TourStorePressLinks(530) 623-9626
 
 
1932 Ford 3 Window Coupe
SOLD
1932 Ford 3 window coupe.....The Holy Grail of Hot Rodding. Original Henry Ford steel car body and Chassis. Chop, metalwork, and chassiswork performed by the well known and respected California based early ford builder Rudy Rodriquez. Original floors are rock solid. usual problem area patches were installed on the lower door skins and lower rear quarters...all tig butt tig welded. Roof was filled with a metal insert. Bodywork was finished on the roof and is near ready for paint. The body from the beltline down is all metal, no filler whatsoever (except for 2 old silver dollar sized spots on the cowl where they filled the cowl lights years ago.) Cowl vent has some pinholes that need to be addressed. Body would need to be massaged for a show car look, but if you are looking for a patina'd ride the body is ready to go. 5" and 4-1/2" chop with layed back A pillars for that go fast Bonneville look. All of the garnish moulding have been cut down and fitted. The interior wood has all been replaced. Frame is nice and straight with only some minor pitting where the fenders would bolt up but not thin whatsoever. Dropped 32 front axle with split bones. Rebuilt steering box- stock 32. Stock rear out back. Comes with a full set of juice brakes. Flathead was just a good runner, but should probably be inspected internally before starting. 3 speed trans was just rebuilt. Heads are my friends and they do not come with it unfortunately. Windshield frame is original and still needs to be fit. New firestones on Black steelies finish the look. Rare chance to own one sweet 32. Sold on Bill of sale, but if you want a clear AZ title (by the original vin # of course) I can arrange that for an additional $500.
 
   
 

 
Phone: (520) 623-1973 • Fax: (520) 623-9626 • Email info@hispeedcustoms.com
 
©Hi Speed Customs • Tucson, Arizona